|
- Low noise, high quality linear power supply for most camera families
- CE approved
- No high frequency noise that can cause patterns in your images
- Desktop design is standard with black finish and camera connector
- Standard D9P (Male) connector and illuminated power switch on front panel.
- Fuse and 9' power cord on back panel.
- Rubber feet and tapped holes (10-32) in base for mounting
- Heavy duty chassis 6.0" wide x 5.1" tall x 9.25" (PS1) x 13.25" (PS3, PS4) Long
Short circuit protection - protects the power supply from improper cabling. After a short, power down the unit, fix the cable, and re-power the unit
Regulator failure protection - protects the camera from catastrophic electronic failures. This supply will shut down if a failure is detected. No high voltage is passed to the outputs which can damaging sensitive equipment
Power line EMI/RFI filter is incorporated to remove unwanted spikes from the source.
| Model # |
Camera Compatibility |
|
PS1-DP9-115
View Data Sheet
|
Piranha, CL-Cx CL-E1/F2, CA-D1,CL-CB, CA-D6, CL-P1, CT-P1, 1M30 |
-15V @ 0.5A, -5V @ 2A,
+5V @ 2 A, +15V @ 0.5A |
PS2 -DP9-115
View Data Sheet
|
Piranha2, Spyder, Spyder2, Spark, Eclipse, Asteroid, and Pantera series, 1M60, 2M30-SA, 4M15-SA, TR-34, EC-11, HS-41, CL-P4, CT-P4 |
13.5V @ 1.5A |
PS3 -DP9-115
View Data Sheet
|
CT-C5, CS-C4, CL-G1, CT-Ex, CT-Fx, CL-T3, 1M15, 4M4, 4M30, 6M3, 6M18 |
-15V @ 0.5A, -5V @ 2A,
+5V @ 6 A, +15V @ 2.5A |
PS4 -DP9-115
View Data Sheet
|
CA-D4/D7 ** Custom 28 volt version only ** |
-15V @ 2.5A, -5V @ 1.5A,
+5V @ 6 A, +28V @ 0.5A |
PS8 -DP9-115
View Data Sheet
|
Large enclosure for special or high power cameras. |
Typically +/-15, +/-12, +/-5 |
*PSR Desktop Series - Similar desktop version offering user selectable 115v and 220v capabilities.
*Rack-mount Series - Any of the standard supplies can be modified to a rack-mount version.
Image Labs has onsite Vision System Engineers with whom you can discuss your total vision system installation. Along with the lifetime warranty, a strict quality control system is in place to ensure the performance of each and every power supply.
Call us at (800)785-5995 or
our technical staff for more information. |
